Custom Floor Wraps | Personalized Dance Floor Decals | Event Floor Graphics | Party Floor Stickers

Turn the floor into part of the celebration. Our custom floor wraps create a bold, photo-ready focal point that makes your event feel polished, personal, and unforgettable. Perfect for graduations, birthdays, baby showers, weddings, memorials, business events, and luxury party setups.

Customize your floor decal with names, photos, logos, colors, themes, wording, or design ideas. Whether you want something glam, modern, fun, elegant, or sentimental, we'll create a design that matches your celebration.

Product Details:

• Custom printed floor decal
• Slip-resistant finish
• Removable after the event
• Great for entryways, dance floors, photo areas, stages, and display setups
• Available in multiple sizes
• Larger sizes may come in multiple panels for easier installation
• Local pickup in St. Louis available
• Shipping available throughout the U.S. and Canada

Please Note:
Floor wraps should be applied to a clean, smooth surface for best results. Custom items are final sale once approved and produced.

📋 Quick Pre-Application Checklist

• ✅ Surface is clean, dry, and free of wax, oil, or residue
• ✅ Surface is smooth and hard (sealed hardwood, tile, laminate, vinyl, smooth concrete)
• ✅ Indoor use confirmed — not intended for outdoor or wet areas
• ✅ Temperature is between 50°F – 90°F during application
• ✅ Panels are laid out and numbered before peeling any backing

🛠️ Installation Guide

Surface Compatibility
Best on sealed hardwood, smooth tile, laminate, vinyl plank, and polished concrete. Not recommended for outdoor use, wet or high-humidity areas, rough/textured flooring, or surfaces with a fresh wax coat.

Surface Preparation

1. Sweep or vacuum the area thoroughly.
2. Wipe down with a damp cloth and an all-purpose cleaner. Avoid wax-based products.
3. Let the surface dry completely — at least 30 minutes. Any moisture will reduce adhesion.

Adhesive Behavior
Our floor wraps use a pressure-sensitive adhesive designed for temporary, event-length use. The adhesive bonds securely when firm pressure is applied and is engineered to lift cleanly without leaving residue on most smooth surfaces. Adhesion is strongest on clean, non-porous floors.

Application Steps

1. Plan your layout. Lay all panels out dry (backing on) to confirm placement and alignment before applying anything.
2. Start from the center or a fixed edge. For multi-panel wraps, work outward from a center seam or align from one straight wall edge.
3. Peel and apply one panel at a time. Pull the backing back a few inches, align the panel, and press firmly from the center outward to push out air bubbles.
4. Smooth as you go. Use a squeegee, credit card, or flat hand to press firmly along the surface. Work edge to edge to eliminate bubbles.
5. Seam alignment (multi-panel). Butt panels snugly together — small overlaps or gaps affect the printed design. Take your time at each seam.
6. Final press. Once all panels are down, walk the entire wrap and press any remaining edges or corners firmly.

Removal
Peel up slowly from one corner at a low angle (roughly 45°). The wrap is designed for single-use removal — peeling cleanly from most smooth, sealed surfaces. For stubborn edges, gently warm with a hair dryer on low heat for 10–15 seconds before lifting. Do not reapply once removed.